Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 80

Model
iR-ADV C9075V2 US 208V
iR-ADV C9075 G
iR-ADV C9065 V2 US 208V
iR-ADV C9065 G
iR-ADV C7065V2 US 120V
iR-ADV C7065 G
iR-ADV C7055V2 US 120V
iR-ADV C7055 G
Cause
If the right or left deck in which the certain amount of paper is loaded is pulled out, the lifter plate would
descend swiftly and the lifter wire[1] that drives the lifter plate may become slack. The photos show the
back side of the left deck. The photo [A] shows the state in good order and [B], the state of slack lifter
wire[a].
In the state with slack lifter wire, if paper is loaded into the right (or left) deck exceeding the paper load limit
level as shown in the photo[A], and then the deck is pushed back into the main body, the lifter motor does
not run because the loaded paper is exceeding the paper load limit level. The photo[B] shows the state that
paper is loaded in line with the paper load limit level.
Serial Number Model
HJW50222 iR-ADV C9070 EU 230V
HVF00502 iR-ADV C9060 EU 230V
HJX50095 iR-ADV C7065I EU 230V
HVG00501 iR-ADV C7055I EU 230V
HJY50414 iR-ADV C9075V2 AU 230V HKF50001
HVH00501 iR-ADV C9065V2 AU 230V HKG50001
HJZ50748 iR-ADV C7065V2 AU 230V HKH50014
HVJ00501 iR-ADV C7055V2 AU 230V HKK50001
Serial Number
HKA50088
HKB50050
HKC50433
HKE50459
78