Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 229

Removing the Hopper Unit (Y)/(M)/(C)
1) Open the front cover to remove the toner container (Y), (M), (C), (Bk) and the ITB unit.
2) Remove the 2 hinge pins [1] to detach the front upper cover [2].
3) Remove the 4 screws [1], 2 claws [2], and 3 projections [3]. Remove the toner container
replacement unit inner cover [4].
[Caution] When installing the toner container replacement unit inner cover [1], be
careful that the 4 toner insertion entrance cover sensors [2] and grounds on the
upper part of the sensor may interfere each other to damage.
4) Open the process unit inner cover to remove the process unit (Y)/(M)/(C).
[Caution]
- After removing the process unit, do not expose the photosensitive drum to direct
light. To block the light, either cover the photosensitive drum protection sheet or
wrap it with paper (5 sheets or more).
YMC
11