Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 205

The following changes occur when upgrading the DCON of the imageRUNNER ADVANCE C5051/
C5045/ C5035/ C5030 copiers from v60.01 to v61.02:
No.
[Modification of field claim]
Fogging occurs at an end of the paper due to the drum toward the final days of service
life.
Regarding an improvement to make up for the drum charging capability, the light
quantity of the pre-exposure LED is reduced. In keeping with this, a modification has
been made to part of the table related to the drum potential.
In order to let the device show the proper drum life, it is now possible for the pre-
exposure LED to have the conventional light quantity during the drum film thickness
detection.
Change of the default value for the light quantity of pre-exposure LED:
Service Mode (Lv2):
1
COPIER >ADJUST >EXP-LED >PR-EXP-Y, M, C, K
<Default value>
Before change: 11
After change: 1
(No change is made to the default value of Vback)
- Caution when the setting value has been changed in Service Mode
Regarding the setting value is rewritten automatically during version upgrading of the
software, if there is a need to change the setting value again, do so while checking a
fault image.
* The combination use of DCON v62.02 or later and S-LNG v61.01 or later is
required.
Color Registration
Description
TP11 128e.pdf
e-Support Filename:
05-27-11
Date:
Page 6 of 12