Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 109

Service Work
1) Open the front door.
2) Remove 3 screws [1] to remove the escape tray cover [2].
3) Place the flathead driver on the portion [a] of the gear located below the tray [1]. Pulling the flathead driver
toward the front, move the tray [1] so that the tray becomes lower than the grate-shaped upper guide. For
the position of the grate-shaped upper guide, see the photo shown at the next step 4).
4) Remove 5 screws [1] to remove the grate-shaped upper guide [2].
pg. 107