Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 156

7) Press "Start" on Control Panel and check if color displacement has improved on 5 printed samples. If the
symptom has improved, the work is completed.
In case of color displacement in the horizontal scanning direction, perform the step A).
In case of color displacement in the vertical scanning direction, perform the step B).
A) Adjust the start position depending on degree of displacement of each color in the horizontal scanning
direction.
A-1) Go to Service Mode > Mode List > COPIER > Adjust > IMG-REG, and enter a value in any of
REG-H-Y/M/C/K in accordance with degree of color displacement. The setting range is "-128" to "128". If a
setting value is changed by "1", the start position changes by 0.02mm. (Default value: 0)
Change a setting value to a negative value in case of color displacement against other color toward the rear
side, and change it to a positive value in case of color displacement against other color toward the front side.
If C is displaced against other color by 1mm toward the rear side, for example, enter "50" in REG-H-C
(Default value: 0). [1] is the paper feed direction.
A-2) Perform the steps 3) to 7). Check color displacement, and perform the step A) again if the symptom has
not improved enough.
B) Adjust the start position depending on degree of displacement of each color in the vertical scanning
direction.
B-1) Go to Service Mode > Mode List > COPIER > Adjust > IMG-REG, and enter a value in any of
REG-V-Y/M/C/K in accordance with degree of color displacement. The setting range is "-128" to "128". If a
setting value is changed by "1", the start position changes by 0.02mm. (Default value: 0)
Change a setting value to a negative value in case of color displacement against other color toward the
pg. 154