Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 204

No.
[Modification of a field claim]
22 Modification of an error where both Local UI and Remote UI occasionally fail to log
in at the time of domain authentication with SSOH in use.
[Modification of a field claim]
23 Modification of a PS error that occurs when the PS file which was created by the Unix
system is submitted.
[Modification of a field claim]
24
Modification of a fault where the extension may ring in a fax transmission.
[Modification of a field claim]
25 Modification of a fault where a memory leak may occur at the open source part,
causing the UI control panel to lock.
[Modification of a field claim]
26 Modification of an error where the cleaning is not started even when [Start] is pressed
after selecting [Clean Feeder].
Please Note: When upgrading the imageRUNNER ADVANCE C5051/ C5045/ C5035/ C5030 from
v56.01.03 to v60.39.02 V2, the Language must also be upgraded to v60.39.
The following changes occur when upgrading the DCON of the imageRUNNER ADVANCE C5051/
C5045/ C5035/ C5030 copiers from v61.02 to v63.01:
No.
[Modification of an Error]
As a measure to prevent color displacement and/or sub scanning direction-based even
density at regular intervals that may occur during constant speed (normal paper)
printing of imageRUNNER ADVANCE C5035/ C5030 models, the coefficient of the
drum motor drive speed control changes.
1
There is a case where the speed control becomes unstable due to the influence of
resonant frequency around the drum resulting from the individual difference of the
drum motor. In order to increase the margin for this resonant frequency, the speed
control coefficient has been changed.
Description
Description
Banding
TP11 128e.pdf
e-Support Filename:
05-27-11
Date:
Page 5 of 12