Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 186

7. Install the new transmission shaft and deck lifting plate wire for the lifting plate onto the 1.1K Paper
Deck Assembly.
8. Turn the lifter gear [12] by hand and make sure that the paper lifting plate raises level with ease. If
the plate does not raise level or smoothly, the windings mention in Step 6 are probably out of phase.
If this is the case, take out the transmission shaft and deck lifting plate wire and ensure the windings
are correctly installed.
9. Install and secure the oil damper (XH9-0148-000) [3] with two (2) PH2x4 screws (XA1-1200-407)
[4] onto the damper holder [1].
CAUTION!
Do not use much force when installing the oil damper. Ensure the oil damper is secured by hand
!
tightening. If the oil damper is secured too tightly, the outer shell may crack causing oil to leak
from the damper. If this occurs, replace the oil damper with a new one.
TP11 249.pdf
e-Support Filename:
07-19-11
Date:
Page 6 of 8