Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 161

c-1) Reposition the Switch to the right position. If it's damaged and/or deformed, replace
the Fixing Feeder Assembly Open/Close Switch (FM3-4952-000) with a new one.
c-2) Ensure the correct position of the Boss [2].
c-3) Insert the Fixing Feeder Assembly into Main Body and turn Main Power Switch on.
c-4) If the issue has been corrected, the work is completed. If the symptom remains, go to
"C) DC CONTROLLER I/F PCB ASS'Y replacement work".
d) If the mounted position of the Fixing Feeder Assembly Open/Close Switch is appropriate,
go to "C) DC CONTROLLER I/F PCB ASS'Y replacement work".
d-1) For E004-0205/0501/0502 or E006, go to :
"C) DC CONTROLLER I/F PCB ASSY (FM3-9571-010) replacement work".
d-2) For E007-9902, replace Fixing/Feeder Driver PCB Assembly (FM3-9575-010).
C) DC CONTROLLER I/F PCB ASS'Y (FM3-9571-010) replacement work
1) Disconnect the Reader Power Supply Cable and remove the Box Cover (left) and the Box Upper Cover.
2) Remove the 3 screws from the Controller Box Assembly.
3) Open the HDD Cover, remove the 3 screws, and open the Controller Box Assembly.
4) Loosen the 4 screws of the Controller Box Assembly and pull in the direction of the arrow,
then remove the DC Controller Cover.
5) Replace DC CONTROLLER I/F PCB ASS'Y.
TP12 253.pdf
e-Support Filename:
08-03-12
Date:
Page 4 of 5