Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 158

PRODUCTS AFFECTED / SERIAL NUMBERS AFFECTED:
imageRUNNER ADVANCE C7055/ C7065/ C9065S PRO/ C9075S PRO/ C9065 PRO/ C9075 PRO
GENERAL: Measure to Minimize E004-0205/0501/0502, E006, E007-9902 Errors
DETAILS:
This Technical Publication describes measures to minimize the following error codes:
Thermistor temperature difference error
E004-0205:
Fixing Main Thermistor, connection error (circuit failure) of Fixing Subthermistor 1/2
E004-0501:
Pressure Sub Thermistor 1/2 connection error (circuit abnormality)
E004-0502:
Fixing Feed Drawer connection error
E006:
Pressure Belt displacement failure (Full displacement of the Pressure Belt or failure of
E007-9902:
the Pressure Belt Position Sensor).
Causes:
E004-0205/0501/0502, E006 and E007-9902 may occur due to the following:
Factors at Fixing Drawer Connector Terminal
- Foreign substances
- Poor contact and/or deformation of terminals
The pictures below show Fixing Drawer Connector and the deformed pin [a].
E004-0205/0501/0502, E006 and E007-9902 may occur due to the following:
Factors at Fixing Feeder Assembly Open/Close Switch (SW7)
- Mounting position failure of Fixing Feeder Assembly Open/Close Switch Lever
- Mounting position failure of Fixing Feeder Assembly Open/Close Switch Holder
THIS TECHNICAL PUBLICATION IS THE PROPERTY OF CANON U.S.A. INC. AND CONTAINS CONFIDENTIAL INFORMATION OWNED BY OR LICENSED TO,
CANON U.S.A., AUTHORIZED CANON U.S.A., DEALERS MAY USE THIS TECHNICAL PUBLICATION FOR REFERENCE PURPOSES ONLY. ANY OTHER USE
BY AN AUTHORIZED CANON USA DEALER, OR USE BY ANY THIRD PARTY, IS PROHIBITED.
For additional technical information, please visit the Canon Systems and Technical Support Division website at:
www.support.cusa.canon.com. You can also call the Technical Support Center at 1-800-528-2830 or contact your Regional Support Office.
TP12 253.pdf
e-Support Filename:
08-03-12
Date:
Page 1 of 5