Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 234

YMC
19) Remove the 5 wire saddles [1], 6 harness guides [2] and 4 connectors [3] to remove the
harness.
20) Remove the 2 screws [1] to detach the 4 grounding wires [2].
21) Remove the 2 screws [1], the wire saddles [2] and the connector [3]. Detach the high
voltage PCB box [4] and temporarily place it on the controller box.
22) Remove the 4 wire saddles [1], the edge saddle [2], and 3 relay connectors [3] to
detach the harness.
16