Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 150

2) In Service Mode > Mode List > COPIER > Function > INSTALL > "INT-ITB," adjust the ITB neutral
position.
3) In Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Correct Color
Mismatch >, press "Start".
4) Load 20 or more sheets of A3 (11"x17") plain paper into the cassette 3.
5) In Service Mode > Mode List > COPIER > TEST > PG > TYPE, enter "6" and press "OK".
[Reference] Color displacement in the horizontal/ vertical directions can be checked by outputting the PG.
6) In Service Mode > Mode List > COPIER > TEST > PG > PG-PICK, enter "3" and press "OK".
7) In Service Mode > Mode List > COPIER > TEST > PG > PG-QTY, enter "20" and press "OK".
8) Press "Start" on the Control Panel and check if color displacement has been improved on 20 printed
samples. If the symptom has been improved, the work is completed.
If no improvement is made, set the value back to "0" in Service Mode > Mode List > COPIER > Adjust >
FEED-ADJ > TBLT-SPD.
[Reference] If the above remedy does not improve the color displacement, refer to the following FAQ.
- If fixed displacement in any color of YMCK occurs on all pages, refer to "Fixed displacement in any color of
YMCK occurs on all pages".
- If fixed displacement in Bk occurs in a large quantity of print job, refer to "Fixed displacement in Bk occurs
in a large quantity of print job".
pg. 148