Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 211

No.
8
9
10
11
12
13
14
FIRMWARE:
Canon U.S.A. uses the following abbreviations when listing languages that are supported by a specific
version of the System Software:
Note:
imageRUNNER ADVANCE C5035/C5030 units from the warehouse will have a packing slip attached to the
side of the box. This contains documentation and a CD-ROM with SST System Software v60.39.03 V2
firmware. The USB version can be downloaded from the Canon e-Support website or can be made using the
Service Support Tool v4.33Ez.
Please note that several versions of v60.39 were released and to verify if the latest version is installed, check
if DCON v63.01 is listed in SERVICE MODE > MODE LIST > COPIER > DISPLAY > VERSION >
DCON. If not, a lower version of v60.39 is installed and the machine should be upgraded.
Please make sure to install the entire System Software version by performing "UPGRADE".
When executing LOGOUT during direct transmission with the setting of function
limitation in NewCardReader Department ID management, the transmitted job is
canceled.
[FAX]
Some settings of detailed information on the Address/One-touch button of a client
machine have been disabled when a transmission is executed with the setting of a FAX
server machine.
[FAX]
Some detailed settings of the Address book cannot be checked in a client machine.
FAX data cannot be received when the printer function stops working due to an error
and other reasons.
[PDF direct print/Web browser]
When specifying staple or punch for data to be output in landscape, the processing is
implemented to the area other than that in a conventional machine with CanonPDF
installed.
When executing logout after entering analysis mode of an analysis application, it takes
a large amount of time until logout occurs. It takes approx. 5 to 13 seconds more than
in other modes.
Devices which have the following combination of software installed cannot be
upgraded from CDS. When upgrading such devices, use the Service Support Tool
(SST) or USB.
- System Software v40.xx/MEAP v38.xx
- System Software v40.xx/MEAP v41.xx
Description
Letter Language
J Japanese
E English
F French
I Italian
G German
S Spanish
C/T Chinese
K Korean
TP11 128e.pdf
e-Support Filename:
05-27-11
Date:
Page 12 of 12