Canon imageRUNNER ADVANCE C5000 Series Technical Workbook page 74

b-3) Remove 4 screws [1], 2 claws [2], and 3 protrusions [3]. Then remove the toner container replacement
unit inner cover [4].
[Caution] When installing the toner container replacement unit inner cover [2], be careful not to allow it to
interfere with the toner insertion inlet cover sensor [1]. It may damage the sensor.
b-4) Measure the protruded length [a] of the link shaft [1] in a color station where the small door cannot be
opened. Make sure that the protruded length [a] is 37.5 mm or greater.
72