Cold Settings For Multistage Mode ("Lo 2 Stage" And " Lo 3 Stage") - Siemens LMV27.100x2 Basic Documentation

The warm settings for air-fuel ratio control of the LMV27 have now been configured.
26.11.12 Cold settings for multistage mode («Lo 2 stage» and « Lo 3 stage»)
Building Technologies
P
V h min s
Note

Refer to chapters Warm settings for «Lo 2-stage» and «Lo 3-stage»! But with no
flame, no actuator travel and no automatic operation after the settings have been
made.
If run is shown in the display, the following must be observed:
P
V h min s
Note!

You now have the option of pressing
the LMV27.
Basic Documentation LMV27...
26 Parameter level
ESC
%
Identification of start for setting the curve.
%
ESC
to continue with the cold setting for
179/219
CC1P7541en
17.12.2018