Fuel / Air Ratio Curves - Settings And Commissioning; Initial Commissioning - Siemens LMV27.100x2 Basic Documentation

26.11 Fuel / air ratio curves – settings and commissioning

26.11.1 Initial commissioning

For initial commissioning, change to the parameter level (refer to chapter Operation).
The settings can then be made on parameter level 400.
/reset
/reset
158/219
Building Technologies
P
V h min s
P
V h min s
P
V h min s
P
V h min s
Basic Documentation LMV27...
26 Parameter level
The display shows 400: flashing on the left,
SEt appears on the right.
%
An unprogrammed LMV27 or a LMV27 whose
operating mode has been reset or changed displays
OFF UPr.
%
Press to select parameter 400 for initial
/reset
commissioning and for setting air-fuel ratio control.
%
Press to go to the settings for air-fuel ratio control
/reset
and parameter 201 for selecting the operating mode.
%
201: appears flashing.
CC1P7541en
17.12.2018