Display Of Service Values (Example); Number Of Faults; Error History; Intensity Of Flame - Siemens LMV27.100x2 Basic Documentation

25.2 Display of service values (example)

25.2.1 Number of faults

To the next parameter

25.2.2 Error history

Refer to chapter Parameter with index, without direct display/Example of parameter 701: Error history!


25.2.3 Intensity of flame

To the next parameter


25.2.4 End of service level

To the start of the service
level
ESC
Building Technologies
P
V h min s
or
Note
Can be deleted for service (refer to chapter Parameter list)!
P
V h min s
or
Note
Also refer to chapter Intensity of flame during curve settings.
P
V h min s
P
V h min s
P
V h min s
Basic Documentation LMV27...
25 Service level
The display shows parameter 161: flashing on
the left, the number of faults that occurred thus
far on the right 0.
Example: Parameter 161: 0
%
/reset
<1 s
The display shows parameter 954: flashing on the
left.
On the right, the flame's intensity is displayed as
a percentage.
%
Example: 954: 0.0
/reset
<1 s
When this display appears, you have reached the
end of the service level.
Display – End – appears flashing.
%
ESC
Press
OPErAtE appears for a short moment.
%
When this display appears, you are back on the
normal display and you can change to the next
level mode.
%
Back to the previous
parameter.
Back to the previous
parameter.
To the end of the service
level
to return to the normal display.
CC1P7541en
139/219
17.12.2018