Siemens LMV27.100x2 Basic Documentation page 164

Wait until the burner is operating and symbol
The startup sequence stops in phase 36 Traveling to ignition position.
The ignition position can be adjusted under cold conditions.
or
F
and
or
164/219
Building Technologies
P
A
V h min s
P
V h min s
P
V h min s
P
V h min s
P
V h min s
P
V h
Basic Documentation LMV27...
26 Parameter level
or is no longer highlighted!
Ignition position P0 can only be set after symbol
or
For fuel, keep
Press
%
When symbol
highlighted, the next curvepoint P1 can be
selected with
Phase Traveling to ignition
%
Phase Preignition
%
Phase
1st safety time (ignition transformer ON)
%
Phase 1st safety time (ignition transformer OFF),
preignition time OFF
%
Phase Interval 1
min s %
is no longer highlighted.
depressed, for air
F
or to adjust the value.
or is no longer
.
position
.
A
CC1P7541en
17.12.2018