Intensity Of Flame During Curve Settings - Siemens LMV27.100x2 Basic Documentation

26.11.13 Intensity of flame during curve settings

When setting the curve and the curvepoint is displayed, you can press
When pressing the button for >1 s, a change to parameter 954 is made; when releasing the button, you
return to the curvepoint.
/reset
180/219
Building Technologies
P
V h min s
P
V h min s
Basic Documentation LMV27...
26 Parameter level
Example: Curvepoint Low-flame position P1.
%
Change to parameter 954
/reset
>1 s
Parameter 954: flashes.
The intensity of flame in % is shown on the right.
Example: 954: 0.0
Release
/reset
position P1.
%
to show the intensity of flame.
/reset
to return to curvepoint Low-fire
CC1P7541en
17.12.2018