Juniper M120 Hardware Manual page 130

M120 Multiservice Edge Router Hardware Guide
104
P = P – LL
M B
P = 13 dB – 2 km (1 dB/km) – 5 (0.5 dB) – 2 (0.5 dB) – 0.5 dB
M
P = 13 dB – 2 dB – 2.5 dB – 1 dB – 0.5 dB
M
P = 7 dB
M
The following sample calculation for an 8-km-long single-mode link with a power budget
(P ) of 13 dB uses the estimated values from
B
(LL) as the sum of fiber attenuation (8 km @ 0.5 dB/km, or 4 dB) and loss for seven
connectors (0.5 dB per connector, or 3.5 dB). The power margin (P
follows:
P = P – LL
M B
P = 13 dB – 8 km (0.5 dB/km) – 7(0.5 dB)
M
P = 13 dB – 4 dB – 3.5 dB
M
P = 5.5 dB
M
In both examples, the calculated power margin is greater than zero, indicating that the
link has sufficient power for transmission and does not exceed the maximum receiver
input power.
Table 58 on page 103 to calculate link loss
) is calculated as
M
Copyright © 2018, Juniper Networks, Inc.