Connection Diagram Of The Power Module - Siemens SINAMICS G130 Engineering Manual

4.3 Connection diagram of the Power Module

An overview of the power and signal interfaces of the SINAMICS G130 Power Module is shown below.
Power connections
·
Mains connection: U1, V1, W1, PE1
·
Motor connection: U2, V2, W2, PE2
·
DC link connection for optional braking unit: DCPA, DCNA
·
DC link connection for optional dv/dt filter plus VPL or dv/dt filter compact plus VPL: DCPS, DCNS
Signal connections and 24 V auxiliary supply
·
See connection diagram
Power Module
PE1
U1
V1
W1
P24 M
1 2 3 4 5 6
[1] [2] [3]
Connection diagram for power and signal connections on the SINAMICS G130 Power Module
DCPS
DCNS
DCPA
DCNA
DRIVE-CLiQ socket 0
Control Interface Module CIM
DRIVE-CLiQ socket 1
DRIVE-CLiQ socket 2
[4] [5] [6]
Engineering Information
[1] Connection for an external
24 V supply
[2] Reserved
[3] Connection for controlling
PE2
a main contactor
[4] Connection for a temperature sensor
U2
KTY84-130, PT1000, PT100 or PTC
for motor monitoring
V2
[5] Connection for Safety Functions
W2
Safe Torque Off / Safe Stop 1
[6] 24 V outgoing feeder to supply
the CU320-2 Control Unit and,
if installed, AOP30, TM31 and
SMC30
[7] Connection for Safe Brake Adapter
- X100
- X400
DRIVE-CLiQ socket
Control Unit
CU320-2
Serial interface
RS232
- X401 - X500
DRIVE-CLiQ sockets
1st Terminal
Module TM31
- X402 - X500
DRIVE-CLiQ socket
Sensor Module
SMC30
[7]
SINAMICS Engineering Manual – November 2015
SINAMICS G130
Operator Panel
AOP30
- X140 - X540
Serial interface
RS232
- X501 - X500
DRIVE-CLiQ socket
2nd Terminal
Module TM31
285/528
Ó Siemens AG