Function List; L## Function Level; Menu Item; M## Function - Bosch D9412GV2 Program Entry Manual

D9412GV2/D7412GV2 | Program Entry Guide | 2.0

L## Function Level

Default: Refer to the program record sheet
Selection: M, D, C, or Blank
M Activate the custom function assigned
to the door in this area while the area
is Master Armed of Perimeter
Armed.
D Activate the custom function assigned
to the door in this area while the area
is disarmed.
C Users can not use a custom function
assigned to the door in this area,
regardless of the armed state.
Blank Users can not use a custom function
in this area.
When a token or card can also disarm an
area, the custom function starts after the
area disarms.
A user does not require L## Security Level
or L## Disarm Level authority to activate a
custom function with a token or card.
Tokens or cards that are used to execute
Custom Functions must have a pass code
assigned to the correspoinding User###.
Bosch Security Systems | 5/05 | F001U003636B
GV2MAIN
2.12

Function List

The Function List is accessed when the user presses
[MENU] (or the key corresponding to menu on the
D1260) while the keypad shows the idle text. Program
M### Function
as many as 32
Each CC # keypad address can display a combination
of any of the 32 menu items. The D1255 displays one
menu item at a time. The D1260 displays up to two
menu items at a time. Each keypad address has one
Function List. The function name shown in the
Functions column in the program record sheet appears
in the keypad display in capital letters. For example,
WATCH MODE appears when you select
Mode.

Menu Item

Default: Refer to the program record sheet
Selection: 1 to 32
Enter the menu item number you are programming.
The M## Function displays items sequentially in the
order they are programmed. The M1 Function is the
first function that appears in the menu and M32
Function is the last function that appears when
scrolling through the menu.
Failing to program Menu Item 1 causes
COMMAND DISABLED to appear in the
keypad display.

M## Function

Default: Refer to the program record sheet
Selection: Blank, 1 to 30, 32 to 35, 37, and
128 to 143
Enter the function number indicated in the "#"
column of the program record sheet or next to the
function in Section 2.11 User Interface on page 54.
Function numbers 128 to 143 are custom
functions and show the text programmed
for CF ### Text.
There is no restriction on how many times
you can assign a specific function to the
menu. By assigning a specific function
more than once, you can assign the same
function at different keypads so that their
order is different in different areas.
EN | 70
(s).
#6 Watch