L## Send Report; L## Door Control; L## Cycle Door; L## Unlock Door - Bosch D9412GV2 Program Entry Manual

D9412GV2/D7412GV2 | Program Entry Guide | 2.0

L## Send Report

Default: Refer to the program record sheet
Selection: Blank or E
Function No. Function Name
13 Send Report
Send a Test Report from any keypad assigned to an
area where the user has authority.
Access Control Functions
Use the following functions to control the doors from
the keypad. Users can have authority to access the
Door Control and can use all or part of the functions
within.
All doors display when this function is
selected. This function does not follow the
scope of the keypad.

L## Door Control

Default: Refer to the program record sheet
Selection: Blank or E
Function No. Function Name
14 Door Control
This item only allows programming access to the
following three sub-prompts. It does not affect the
user's access to Cycle Door, Unlock Door, and Secure
Door.
Cycle Door, Unlock Door, and Secure Door
cannot be accessed through the Function
List. Door Control must be added to the
Function List to access the door control
functions, or COMMAND 46 can be used.
The following prompts are sub-functions of Door
Control. They become visible in the D5200
Programmer when you Enable Door Control and
press [ENTER] on the D5200.
Cycle Door must be enabled for all three
sub-functions to operate. If Cycle Door is
disabled, all three sub-functions do not
operate.
Bosch Security Systems | 5/05 | F001U003636B
GV2MAIN
Alternate Keystroke
[COMMAND][4][1]
or
Cycle Door (Menu Function only)
[COMMAND][4][2]
To cycle the doors, press number [1] through [8] on
the keypad, corresponding to the door number. For
example, pressing [2] and [ENTER] cycles door
number 2, which is indicated by C in the display. Refer
to "Cycle Door" in Table 27 on page 65.
Cycle Door allows the user with this authority level to
access the CYCLE? 12345678 function.
To unlock or relock a door, press number [1] through
[8] on the keypad, correspoding to the door number
(refer to "Unlock Door" in Table 27 on page 65). For
example, pressing [2] and [ENTER] unlocks door
Alternate Keystroke
number 2. The display indicates "U' (for unlock door)
[COMMAND][4][6]
with the door number.
Unlock Door allows the user with this authority level
to access the UNLOCK? 12345678 function.
Press number [1] through [8] on the keypad,
corresponding to the door number to secure or
unsecure a door (refer to "Secure Door" in Table 27 on
page 65).For example, pressing [2] and [ENTER]
secures door number 2, which is indicated by an X in
the display.
Secure Door allows the user with this authority level to
access the SECURE? 12345678 function.

L## Cycle Door

Default: Refer to the program record sheet
Selection: Blank or E
Function No. Function Name
(None) Cycle Door

L## Unlock Door

Default: Refer to the program record sheet
Selection: Blank or E
Function No. Function Name
(None) Unlock Door

L## Secure Door

Default: Refer to the program record sheet
Selection: Blank or E
Function No. Function Name
(None) Secure Door
EN | 64
Alternate Keystroke
(Menu function only)
Alternate Keystroke
(Menu function only)
Alternate Keystroke
(Menu function only)