Configure The Ftp; Configure The Upnp - Zte H1600 Maintenance Management Manual

Parameter
Destination Port
Source MAC Address
3. Click Apply button to apply the changes.

5.5 Configure the FTP

The section describes how to configure FTP. FTP provides the parameters of FTP con-
figuration features.
Prerequisite
Before configuring FTP application, make sure a USB storage device is connected to
open the ZTE H1600 device.
Steps
1. On the main page of the ZTE H1600, select Local Network > FTP to open the FTP
page, see
Figure 5-25 FTP
2. Table 5-13
Table 5-13 FTP parameters
Parameter
Server
Username/Password
3. Click Apply button to apply the changes.

5.6 Configure the UPnP

The procedure provides the parameters of
SJ-20210621164956-008 | 2022-09-01(R1.3)
Description
Destination port number of the matching packets.
MAC address of the source device that sends the matching
packets.
Figure 5-25.
lists the FTP parameters.
Description
Click On to enable the FTP server function.
Click Off to disable the FTP server function.
It is valid only if the FTP security function is enabled.
UPnP configuration features.
5 Configure the Local Network
65