Set Private Print; Set User Passcode Minimum Length - Xerox D95 Supplementary Manual

12. Select [Feature Access].
13. On the [Feature Access] screen, select an item by [Change Settings].
14. Select [Locked].
15. Select [Save].
Perform steps 13 and 15 for each item.
16. To exit the [Access Control] screen, select [Close].

Set Private Print

1. Select [Authentication/Security Settings] on the [Tools] screen.
2. Select [Authentication].
3. Select [Charge/Private Print Settings].
4. On the [Charge/Private Print Settings] screen, select [Received Control].
5. Select [Change Settings].
When [Login to Local Accounts] is selected
1) On the [Receive Control] screen, select [According to Print Auditron].
2) Select [Save As Private Charge Print Job] for [Job Login Success].
3) Select [Delete Job] for [Job Login Failure].
4) Select [Delete Job] for [Job without User ID].
When [Login to Remote Accounts] is selected
1) On the [Receive Control] screen, select [Save As Private Charge Print Job].
6. Select [Save].
7. To exit the [Charge/Private Print Settings] screen, select [Close].

Set User Passcode Minimum Length

Note: This feature is only available in Local Authentication mode.
1. Select [Authentication/Security Settings] on the [Tools] screen.
2. Select [Authentication].
3. Select [Passcode Policy].
4. On the [Passcode Policy] screen, select [Minimum Passcode Length].
5. Select [Change Settings].
6. On the [Minimum Passcode Length] screen, select [Set].
®
Xerox D95/D110/D125 Copier/Printer Security Function Supplementary Guide 13