Erasing Fault Memory; Ending Output - Skoda OCTAVIA Workshop Manual

01
Function unknown or cannot
be carried at the moment
Test of vehicle systems
Select function XX
Test of vehicle systems
Select function XX
Test of vehicle systems
05 Erase fault memory
Test of vehicle systems
Fault memory is erased!
Test of vehicle systems
Select function XX
Attention!
Fault memory was not interrogated
Test of vehicle systems
06 End output
Test of vehicle systems
Enter address word XX
------------ ------------
Self-Diagnosis
K Readout in display:
→
- Press → key.
HELP K Readout in display:
- End output ⇒ page 01-56.

Erasing fault memory

Requirements:
Fault has been rectified
Fault memory has once again been interro-
gated
Operational check has been carried out
- Connect fault reader V.A.G 1552 and select
central locking control unit ⇒ page 01-46.
HELP
K Readout in display:
- Press keys -0- and -5-.
Q K Readout in display:
- Confirm entry with the key Q.
K Readout in display:
→
- Press → key.
HELP K Readout in display:
Notes:
If this readout appears in the display, the test
K
sequence was not carried out correctly.
Adhere strictly to the test sequence; first of
all interrogate fault memory, then erase.

Ending output

- Press keys -0- and -6-.
Q K Readout in display:
- Confirm entry with the key Q.
HELP K Readout in display:
- Separate plug connections to the fault reader
V.A.G 1552.
OCTAVIA
Edition 07.97
S00.5118.52.20