Removing And Installing Outer Door Handle - Skoda OCTAVIA Workshop Manual

58
------------ ------------
Rear Doors/Door Components
Removing and installing outer door
handle
Special tools, testers and aids required:
♦ Square wrench or TORX 20
♦ Assembly tool T10118
Removing
K - Pull outer door handle -3- up to the stop in
direction of actuation -arrow A- and hold.
- Remove cap -1-.
- Turn screw -4- in the direction indicated
-arrow B- until resistance is perceptible.
Note:
Screw -4- must not be turned as long as the
outer door handle is removed.
- Pull out cover -2- -arrow C-
K - Unclip control cable -1- from door handle -2-.
- Slide door handle -2- to the rear -arrow A-
and swivel out of the door -arrow B-
Installing:
- Swivel door handle into the door.
For vehicles 05.98 ®
K - Hang device T10118 in the spring fixed to
the door lock -arrow A- and hang the spring
in the lock lever -arrow B-.
For all vehicles
Further installation is carried out in the reverse
order.
Note:
The control cable must lock securely into the
outer door handle.
OCTAVIA
Edition 03.03
S00.5118.64.20