01
→
–
Press
key.
Readout on display, e.g.: (RR door control unit)
→
–
Press
key.
Readout on display:
Ending output ⇒ 01-1 page 8.
–
Interrogating fault memory
–
Connecting vehicle system tester -V.A.G 1552- and
selecting the address word for the convenience sys-
tem ⇒ 01-1 page 4.
Readout on display:
–
Select function 02.
Readout on display:
–
Confirm the entry with key
The number of faults stored appears on the display.
→
Press key
to display the stored faults consecutively.
Cause and elimination:
Convenience system with CAN databus cable ⇒ Chap.
01-2.
Convenience system with LIN databus cable ⇒ Chap.
01-3.
Note
♦
If a fault is detected:
♦
1. Remove fault.
♦
2. Erase fault memory (Function 05).
♦
3. Perform a functional test of the convenience sys-
tem.
♦
4. Interrogate fault memory (Function 02) again.
If „No fault detected" the program returns to its initial po-
→
sition after key
is pressed.
Readout on display:
If anything else appears on the display: ⇒ Operating in-
structions of the vehicle system tester.
Ending output ⇒ 01-1 page 8.
–
–
Switch off ignition and switch off vehicle system tester.
Actuator diagnosis
–
Connecting vehicle system tester -V.A.G 1552- and
selecting the address word for the convenience sys-
tem ⇒ 01-1 page 4.
Readout on display:
01-1
6
page
.
Q
Self-diagnosis for convenience system
6Q1959812 OM
door control.RR
Vehicle system test
Select function XX
Vehicle system test
Select function XX
Vehicle system test
02 - Interrogating fault memory
X faults detected
No fault detected!
Vehicle system test
Select function XX
FABIA 2000
Body Work
TFK 0001→
HELP
HELP
Q
→
→
HELP
Edition 01.05
S00.5319.15.20