OCTAVIA
Edition 09.03
S00.5118.65.20
Seat Frames
Front seats
Removing and installing seat
Valid for vehicles with side airbag
Warning!
When manipulating a seat fitted with a side airbag
unit observe the safety instructions ⇒ page 69-8.
-
Disconnect negative terminal of the battery
K -
Unplug connector for seat heater -arrows A-
(on vehicles with electrically heated seats)
and disconnect side airbag -arrow B- on un-
derside of seat (if necessary disconnect plug
connection for seat belt buckle signaling).
Valid for all vehicles
-
Push seat fully forward.
-
Pull out caps -1-
K -
Take out screws -2- and pull out cover strips
-3- facing upwards.
-
Push seat fully backward.
K -
Unscrew screws or nuts -1-.
-
Release catch rod and push seat fully back-
ward out of the runners.
Installing seat
The installation is carried out in the reverse order
-
Tighten screws or nuts -1- with a tightening
torque of 23 Nm.
Valid for vehicles with side airbag
-
Switch the ignition on before connecting the
battery.
Warning!
Nobody should be in the vehicle when the battery
is being connected.
72
------------ 72-1 ------------