Bonnet; Survey Of Components Of Bonnet - Skoda OCTAVIA Workshop Manual

OCTAVIA
Edition 10.04
S00.5118.66.20
Bonnet/Boot lid/Tailgate

Bonnet

Survey of components of bonnet

1 - Radiator grill
♦ Removing:
-
-
♦ The installation is carried out in re-
♦ After installation radiator grill must be
2 - Grid
3 - Radiator grille frame
4 - Decorative strip
5 - Bonnet
♦ The tailgate can be adjusted by means
♦ Protect the hinge and screws against
6 - 3.5 Nm
7 - 22 Nm
8 - Bracket
9 - 3.5 Nm
Removing and installing fl ap lock
Removing:
- Unclip control cable -1- at lock.
- Disconnect plug connection -2- from bon-
net.
- Remove screws -3- (14 Nm).
Installing:
The installation is carried out in reverse order.
Adjusting:
Bonnet must be adjusted fl ush to the body.
Pay attention to equal gap dimensions be-
tween bonnet and body.
Adjust buffer and check the closing and
opening procedure
Unscrew screws -6- and -9- and re-
move radiator grill.
Disassemble radiator grill in individual
parts -2-, -3- and -4- ⇒ page 55-1.1
verse order
fl ush with the engine bonnet
of the oval holes on the hinge
corrosion after assembly or adjust-
ment
55
------------ 55-1 ------------