Konica Minolta SONIMAGE HS2 Operation Manual page 76

2 .2 Power Supply Cord Connection and Battery Capacity
When the Power Extension Unit2 is not used
MagicBand
Φ130 mm
Wind the cable twice
with a circle of Φ130
mm, fix it with two
MagicBands, place
it as the clamp is
placed between the
MagicBands, and then
fix it with a clamp.
Cable
hook
Hook the extra length
of the power supply
cord on the cable hook .
Push the nail in front of the clamp to
remove the clamp .
When the clamp has been removed
When the Power Extension Unit2 is used
Clamp
Cable
hook
Pass extra length of the AC
adapter cable through a clamp
•••••••••••••••••••••••••••••••••••••••••••••••••• •• •
2
Insert the power supply cord into the AC
adapter .
3
Connect the mains plug (Hospital Grade)
to a wall mounted AC socket outlet .
• This provides protective earth in the system .
• Once the AC adapter is energized, its status in-
Clamp
• When the system is being used by connecting
• There should be no obstacles near the transducer
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
76
AC adapter cable
Power Extension Unit2
AC adapter
Power supply cord
dicator LED lights up green .
the AC adapter, the battery is being charged .
Mains plug
Wall mounted
AC socket outlet
IMPORTANT ••••••••••••••••••••••••••••••••• •• • •
cable, the wall mounted AC socket outlet and
mains plug .
Clamp