Konica Minolta SONIMAGE HS2 Operation Manual page 205

z Color Flow-mode / Power Doppler-mode / 2D-TDI-mode / SCF-mode
(2)
(3)
No . Location
(1) B-image Area Top Side
(2) Color Bar Area
(3) B-image Area Left Side
(4) B-image Area Right Side
B-image Area Bottom
(5)
Side
<Single display>
(1)
(5)
Direction
You can also not assign any functions by customizing the settings .
[C Steer]: during C ROI display
Left/Right
Available only when a linear transducer has been attached to the system .
Also, any steer operations are not available in a frozen state .
C Scale when the image is in a live state with Color Flow- / Power Dop-
Up/Down
pler- / 2D-TDI- / SCF-mode enabled .
The assigned functions can be changed by customizing the settings .
Up/Down
You can also not assign any functions .
The assigned functions can be changed by customizing the settings .
Up/Down
You can also not assign any functions .
You can also not assign any functions by customizing the settings .
C Gain when the image is in a live state with Color Flow- / Power Doppler-
Left/Right
/ 2D-TDI- / SCF-mode enabled .
Gain operations are not available in a frozen state .
205
5 .6 Common Functions
(4)
Remarks