Table of Contents
Advertisement
3 .7 Data Backup
z Restoring patient / study data
1
Press the [Restore Study Data] button on the [Backup / Restore] screen .
• The screen changes to the [Restore Study Data] screen .
2
Restore data using the same procedure as that of "Restoring the settings for the system"
(above) .
IMPORTANT • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• When you fail to restore data, shutdown the system and remove all connected devices other than external storage
media storing data to be backed up, and then restore data again .
• Study data (images), that were acquired by using the SONIMAGE HS1, cannot be restored to the system .
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Export
This function is used to output the patient data in a CSV file.
1
Press the [Patient Information CSV Export] button on the [Backup / Restore] screen .
• The screen changes to the [Patient Information CSV Export] screen .
2
Select an output destination from the [Device] pull-down menu .
3
Enter a file name in [Export File Name] and press the [Export] button.
• You can enter up to 50 characters for the file name.
• The default value is the following file name.
– PatientList_YYYYMMDD .csv
• When the extension is other than .csv, add .csv to the end of the file name and save the file.
• To return to the [Backup / Restore] screen, press the [Back] button .
Step 2
Step 3
116
Advertisement
Table of Contents
