Table of Contents
Advertisement
Item
Measurement pop-up menu
Scale
Measurement cursor
MRA (Measurement Result
Area)
Show/hide Measurement Result
button
3
Select the desired measurement tool from the measurement pop-up menu .
4
Move the cursor to the start point of measurement by dragging or using the trackball and press
the SET button .
• The start point is confirmed.
5
Move the cursor to the end point and press the SET button .
• The measurement is confirmed and the channel number is displayed near the start point.
• The measurement result is displayed in the measurement result area .
IMPORTANT • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• If, with a measurement remaining active, you start up the function to be displayed on an ultrasound image, such as
Body Mark, Text (Annotation) or Biopsy, the measurement will be interrupted . Measurement is not available, but the
measurement tool and results remain on the image .
• To restore the interrupted measurement to an active state, press the [Measure] button, or end the function you have
started separately, such as Body Mark, Text (Annotation) or Biopsy .
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
HINT
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• After doing a measurement, you can continue to do more measurements by setting the starting point of the next
channel in the image display area .
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
z To end measurement
1
Press
.
• Measurement is ended and the measurement screen is cleared .
z To show the hidden measurement menu
There are following three ways to redisplay the hidden measurement menu .
• Press the measurement icon in the information display area .
• Press the [Measure] button .
• End all other functions activated during measurement .
The layout of the menu differs depending on the selected exam type.
• For details, refer to "Basic Measurement" of the "Operation Manual: Applications" .
An index of physical size .
Depth
More than 10 cm
10 cm or less
5 cm or less
1 .5 cm or less
General term for the start point / end point cursors of the measurement tools .
• Measures by operating the cursor .
• The cursor shape differs depending on the measurement tool.
The area displaying the confirmed measured value.
• Displays the measured value per measurement channel .
Shows or hides the measurement results .
195
Functions
Increments of dot markers
Dot marker in 10 mm increments
Dot marker in 5 mm increments
Dot marker in 2 mm increments
Dot markers in 1mm increments
5 .4 Measurement
Advertisement
Table of Contents
