Table of Contents
Advertisement
Error code
Display message
Failed to export .
CA0A001
This System is busy .
CA0A002
The device is not ready .
CA0A003
The specified device cannot be writen.
CA0A004
There is not enough free space on the device .
CA0A005
Failed to delete . Please try again .
CA10001
A command with the same name already exists .
CA10002
Intonation file settings failed.
CA10003
Can't add any more commands.
DO NOT use the Biopsy during the battery-pow-
CA16001
ered operation .
System may exceed the MI/TI/Ispta .3 described
CA1F001
in the user's manual . Transmission voltage was
lowered .
System error has occurred .
CA1F002
please contact your service representative .
The system has failed to load User Account Set-
tings files. The system has been unstable.
CA2B001
Are you sure you want to restore to the default
setting?
An internal error has occurred .
CA60001
If an error has occurred again after rebooting,
please contact your service representative .
Database connection was failed .
CA60002
So that system is unstable, please reboot the
system .
External storage device was failed to be ejected .
CA60003
Please disconnect the external storage device
after shutting down the system .
The required tag or data is not found .: [tag name]
CA61001
Please check the connected device .
Internal parameter error has occurred .
CA61002
Please contact your service representative .
CA62003
Store Error .
Phenomenon / Solution
Please output after rebooting the system .
Please remove and insert the device again .
Please confirm the lock/unlock status of the device. If
locked, please unlock the device and reinsert it .
Please make more free space and then reinsert the device .
Please try again . If an error has occurred again, please try
again after rebooting the system .
A command with the same name has been registered . Do
the registration again .
Failed to set intonation file. Do the registration again.
The number of registered commands has reached the up-
per limit . Delete other commands and then do the registra-
tion again .
Please connect the AC adapter and then use the Biopsy .
The system can be used as is . If you have the error again,
please contact your service representative .
Please contact your service representative .
Please select [Yes] and set User Account again .
Please reboot the system .
If an error has occurred again after rebooting, please con-
tact your service representative .
Please disconnect the external storage device after shutting
down the system .
Please contact your service representative .
Please contact your service representative .
Please start a new study to store images . If a store error
occurs again, try again after rebooting the system .
295
11 .2 Error Code List
Continued on the next page
Advertisement
Table of Contents
