Konica Minolta SONIMAGE HS2 Operation Manual page 207

z CW Doppler-mode
(2)
No . Location
(1) B-image Area Right Side
(2) B-image Area Left Side
B-image Area Bottom
(3)
Side
(4) D-image Area Right Side
(5) D-image Area Left Side
D-image Area Bottom
(6)
Side
• To use this function, an optional "CW kit" is required . Contact your service representative .
• When B-image is active, refer to "B-mode/ Elastography-mode" of "5 .6 .2 Direct Touch and Drag" for B-image Area
Left, Right, and Bottom Side .
<Dual display>
(1)
(3) (5)
Direction
The assigned functions can be changed by customizing the settings .
Up/Down
You can also not assign any functions .
The assigned functions can be changed by customizing the settings .
Up/Down
You can also not assign any functions .
You can also not assign any functions by customizing the settings .
Left/Right In a live state, it becomes B Gain .
Gain operations cannot be done in a freeze state .
The assigned functions can be changed by customizing the settings .
Up/Down
You can also not assign any functions .
The assigned functions can be changed by customizing the settings .
Up/Down
You can also not assign any functions .
You can also not assign any functions by customizing the settings .
Left/Right
D Gain in CW Doppler-mode and a live state .
207
5 .6 Common Functions
(4)
(6)
Remarks