Table of Contents
Advertisement
z How to attach Acoustic Standoff
1
Open the storage bag of Acoustic Stand-
off, and take out Acoustic Standoff from
the storage bag .
2
Remove a pair of protective films from
Acoustic Standoff.
• Do not discard a pair of protective films as you
will use them in storing Acoustic Standoff.
3
As shown in the figures below, pass the
transducer into one of the two openings
of Acoustic Standoff.
4
Apply an appropriate amount of ultra-
sound gel to the lens surface of the trans-
ducer .
Ultrasound
gel
267
5
Fold Acoustic Standoff over the acoustic
lens surface of the transducer .
6
Insert your thumb into the other opening
to secure Acoustic Standoff to the side of
the transducer .
7
Fold Acoustic Standoff over the lens
again, and pass the transducer into the
other opening .
8.3 Acoustic Standoff
Advertisement
Table of Contents
