Konica Minolta SONIMAGE HS2 Operation Manual page 263

Menu Button
[SNV Display]
[SNV Steer]
[SNV Menu]
[Clear Image]
[Setting]
[Close]
[SNV Color]
[SNV Type]
[Setting] Menu [SNV Gain]
[Contrast]
[Back]
HINT • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• SNV cannot be displayed in M/PW-mode or if M Cursor or the Doppler Gate is displayed . M/PW-mode, M Cursor, or
Doppler Gate cannot be displayed when SNV is active .
• You can also change the setting so that you can disable SNV by pressing
"Confirming preset / modifying user preset" in the "Operation Manual: Applications". If you set so, you can turn off [SNV
Display], [SNV Steer], and [Clear Image] by pressing
up menu closes .
• You can also display explanations of the SNV type . Refer to "Image Screen" in the "Operation Manual: Applications" .
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Enables or disables the SNV .
• SNV cannot be enabled if S4-2, S4-2A, or EC9-3 transducer is used .
Specifies the direction from which the biopsy needle comes into view on the screen.
The enhancement can be increased by specifying the direction in advance .
[Left] : Select this when the biopsy needle will come into view from the left side of
the screen .
[Right] : Select this when the biopsy needle will come into view from the right side
of the screen .
[Auto] : Select this when you cannot select which direction the needle will come
into view from in advance .
• If you want to turn this function off, pressing the highlighted button will remove
your selection .
• When you have selected either Left or Right, the SNV Steer will automatically
rotate as well if you change the Rotate or "Upside/Down" setting in B-mode .
Adjusts contrast with consideration for the sizes of structures in the image .
Switches to Detail Setting menu .
Closes the pop-up menu .
Selects the color you use for enhancement . If the SNV Type is "7", this button is not
available .
• SNV Color is only effective when the SNV type other than "7" is selected.
Selects the enhancement method .
• There are eight patterns (0 to 7) available for the enhancement method such as
movement or continuous structure, etc .
Selects the intensity of enhancement . If the SNV Type is "7", this button is not avail-
able .
[L] : Low
[M]: Medium
[H] : High
• SNV Gain is only effective when the SNV type other than "7" is selected.
Selects the image contrast . This is available for SNV types 4 to 7 .
[L] : Low
[M]: Medium
[H] : High
• Contrast is effective only when SNV type "4" or higher is selected.
Exits the Advanced Setting menu and returns to the SNV menu .
. Also, the transducer mark turns blue and the SNV pop-
263
Functions
in the mode button area . Refer to
8 .2 Biopsy