Table of Contents
Advertisement
5 .2 Body Mark
z For mini console operation
1
Press
in the application start button area and the SET button .
• The Body Mark icon is displayed in the information display area .
• The Body Mark pop-up menu is displayed, and [Mark List] of the currently selected Preset / User Preset is lo-
cated .
2
Use the dial of the F2 button to select a desired Body Mark image from [Mark List], and press
the SET button .
• The selected Body Mark is displayed on the image .
3
Move the transducer mark to operate the trackball .
4
Rotate the transducer mark to the desired angle using the dial on the F2 button .
5
Press
.
• The Body Mark icon in the information display area is hidden and the Body Mark image is confirmed.
z For touch operation
1
Press
in the application start button area .
2
Select a Body Mark image from Body Mark list .
• The selected Body Mark is displayed on the image .
• The [OK] button is displayed at the bottom of the Body Mark image .
3
Drag the transducer mark to the desired position on the Body Mark image .
4
Press the angle setting guide, rotate the transducer mark to the desired angle and press the
[OK] button .
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
HINT
• The Body Mark image is confirmed when no operation has been performed for a specified period of time (sec) set by
using the following procedure: [Setup] screen > [Annotation] tab > [Body Mark Timeout] .
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
z To end Body Mark function
Press
on the pop-up menu .
Transducer mark
Angle setting guide
186
Advertisement
Table of Contents
