Konica Minolta SONIMAGE HS2 Operation Manual page 100

3 .3 Registering Patient Information
Item
[Operator] *
2
[Height]
[Weight]
[BSA]
[Accession No .] *
3
The following letters cannot be entered: "^", "\", "=", "/", "*", "?", " " ", "<", ">", "|", "%", and ":" .
*1:
•
Do not assign any IDs indicated in 1) through 5) below .
•
1) " ."
2) " . ."
3) "CON", "PRN", "AUX", "NUL", "COM0" to "COM9", "LPT0" to "LPT9"
4) Begins with "CON .", "PRN .", "AUX .", "NUL .", "COM0 ." to "COM9 ." or "LPT0 ." to "LPT9 ."
5) Ends with " ." or " "
• Do not assign an ID that differs only in case (upper / lower case) from the one that already exists to a different patient.
• When entering an ID, you can set the system to use zero padding (adding zeros to the start of a number so that it ends up a
specific number of digits long) or automatically enter a particular string of characters at the start of the ID. Refer to the item
"ID format" under "Patient Screen" in the "Operation Manual: Applications" .
*2: The following letters cannot be entered: "^", "\" and "=" .
*3: The following letters cannot be entered: "\" .
Enter an operator .
• The entered operators can be selected from the pull-down menu .
• The 20 latest used names are displayed in the pull-down menu .
• If the number of registered names exceeds 20, the oldest name will be deleted .
• The registered names can be deleted on the setup screen .
Enter height .
• You can set the unit .
cm: Available from 0 to 299 .9
ft: Available from 0 to 9
in: Available from 0 to 11
Refer to "System Screen"of the "Operation Manual: Applications" .
Enter weight .
• You can set the unit .
Kg: Available from 0 .0 to 499 .9
Lb: Available from 0 .0 to 999 .9
Refer to "System Screen" of the "Operation Manual: Applications" .
Calculate from entered height and weight .
• The unit is as follows .
2
m : Available from 0 .0 to 99 .99
• If no BSA value is provided, an application measurement label using BSA as calculation ele-
ment cannot be calculated .
Enter a unique examination number .
Functions
100