Konica Minolta SONIMAGE HS2 Operation Manual page 127

Button
[Store]
[BW Print]
[Still Store]
[Clip Store]
[Cine Clip Store]
[Trackball]
[TGC]
[Simple Adjust]
[Zoom]
[Parameter Display]
[TD Guide]
[S.Adjust Quit]
[D Angle]
[ECG]
[RA Work Flow]
[Report]
[Worksheet]
[Joblist]
[Export Image]
[Full Screen]
[Touch Disable]
[Graph]
[Description]
[MPA Customize]
(MPA that was created)
[Library]
[Voice Control]
[Panoramic View]
Executes the store still image or clip function . You can assign functions according to the
settings .
Executes the BW print function .
Executes the still image store function .
Executes the clip store function .
Executes the Cine clip store function .
Displays the software trackball .
Opens the TGC menu .
Executes the Simple Adjust function .
Zooms an image .
Displays parameters on each screen during dual mode .
Executes the transducer guide function .
Becomes operative when a linear transducer has been attached to the system .
Deactivates the Simple Adjust function .
Sets the Doppler angle to 60°, 0°, or -60° .
Displays to overlay the bright line of an ECG (electrocardiogram) on an ultrasound im-
age .
• To use this function, an optional "Reference Signal Unit" is required .
Starts up the RA Work Flow function .
• To use this function, "RA Work Flow License" is required .
Starts up the Report function .
Starts up the Worksheet function .
The [Joblist] screen appears to allow you to check the status of transmission to the
DICOM storage server .
The [Export Image] screen appears, allowing you to write image data to an SD memory
card .
Starts up full screen display mode .
Starts up Touch Off mode.
Starts up the Graph function .
• To use this function, "OB Report License" is required .
Starts up the Description function .
• To use this function, "OB Report License" is required .
Displays the MPA Customize pop-up menu .
You can create a combination of multiple parameters according to depth as an MPA . Set
the parameters while changing the depth, just like normal parameter operations .
Tap [Utility] to store the settings .
You can display the MPA that you created as an operation button .
Set parameters using the values for the MPA that you created .
Starts up the Library function .
• To use this function, "Library License" or "Direct Recording License" is required .
Starts up the Voice Control function .
• To use this function, "Voice Control License" is required .
Starts up the Panoramic View .
• To use this function, "Panoramic View License" is required .
127
4 .1 Basic Operation
Functions
Continued on the next page