Konica Minolta SONIMAGE HS2 Operation Manual page 56

1.6 System Configuration and Part Name
z Software trackball
You can use the system simply by using on-screen touch control .
Press the [Menu] button > the [Other] tab > the [Trackball] button to display the software trackball .
Another way to display the software trackball is to press the [Measure] button .
The software trackball appears at the lower left corner of the screen .
• The functions and operation procedure of its buttons are the same as the mini console's .
• To change the software trackball display position, touch and drag any area other than the buttons and the software
trackball .
• To hide the trackball, either press the [×] button, activate the free cursor, or switch to a screen other than the study
screen .
To display the hidden trackball again, press the [Menu] button > [Other] tab > [Trackball] button .
Reference • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• To use the software trackball at the start of measurement, turn ON [Measurement Start with Software Trackball] in
the [Measure & Report] tab on the [Setup] screen .
Refer to "Measure & Report Screen" of the "Operation Manual: Applications" .
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Software trackball
*: Operates in the same manner as the SET / EXIT button on the mini console . This is an example of assign-
ments during measurement mode .
z Status indicator LED
The status indicator LEDs turn on / off, blink, or change color to indicate their active status to be notified.
Item
Power
Battery
Displays the start-up status .
• Not-yet-started: turns off
• During start-up and ready for use: turns green
• During standby: blinks in orange
Displays the battery driving / AC connection status .
• Charging: turns orange
• During operation on battery power: turns off
• During operation on battery power (low battery level): blinks in orange
• Full charge: turns green
56
[×] button
[SET] button *
[EXIT] button *
Functions