Table of Contents
Advertisement
SCF-mode parameter list
Item
Sets the transmission voltage .
[Tx Level]
• Displayed in all modes .
[C Scale]
Flow velocity setting for SCF-mode
Steer angle setting for SCF-mode
[C Steer]
• Enabled when a linear transducer has been connected to the system .
[C Gain]
Gain setting for SCF-mode
[C Filter]
MTI filter setting for SCF-mode
Frequency setting for SCF-mode
[C Frequency]
• The actual frequency value differs for each transducer.
[Temporal]
Repeated transmission count setting for SCF-mode
Acoustic line density setting for SCF-mode
[C Density]
• [L] can be selected if a linear transducer is connected .
[Motion Sup .]
Motion artifact reduction setting for SCF-mode
[Spatial Avg .]
Spatial direction smoothing setting for SCF-mode
[C Time Avg .]
Time direction smoothing setting for SCF-mode
Display priority setting for SCF-mode
[C Priority]
• A larger value represents a higher priority, being more effective in overriding B-mode.
[C Invert]
Color invert setting for Directional SCF-mode
[C Baseline]
Baseline setting for SCF-mode
Map setting for SCF-mode
[Color Map]
• Map for Directional SCF-mode is included .
[P DR]
Dynamic range setting for SCF-mode
[Power Cut Off]
Reduced power cut setting for SCF-mode
Setting for changing the B mode parameter to increase the SCF-mode frame rate .
[FR priority]
• When [FR Priority] is set to anything other than [Off], the setting values of THI and acoustic line
density may be limited .
[C SI-Filter]
Image processing setting for SCF-mode
Sets a process to improve resolution for CFM/PDI/SCF mode .
[C iXRET]
• The parameter range depends on the transducer used .
The following adjustments are done in the relevant modes .
• Auto C ROI adjustment in SCF-mode
[Simple Adjust]
• Auto Doppler gate adjustment in PW Doppler-mode
• Auto flow velocity adjustment in PW Doppler-mode/CW Doppler-mode/PW-TDI-mode
Functions
151
4 .4 Basic Scanning Mode
Advertisement
Table of Contents
