Mitsubishi Electric FR-E800 Series Instruction Manual page 343

NOTE
• Regardless of the Pr.71 (Pr.450) setting, offline auto tuning can be performed according to Pr.96 (Pr.463) Auto tuning
setting/status. (Refer to
 Motor settings (575 V class)
• Refer to the following list and set the parameters according to the applied motor.
Pr.71 Pr.450
0 (Pr.71 initial value) Standard motor
10
30
8090
9090
3
13
33
8093
9093
5
15
6
16
9999
— (initial
value)
NOTE
• Regardless of the Pr.71 (Pr.450) setting, offline auto tuning can be performed according to Pr.96 (Pr.463) Auto tuning
setting/status. (Refer to
 Using two types of motors (RT signal, Pr.450)
• When using two types of motors with one inverter, set Pr.450 Second applied motor.
• The setting value "9999" (initial value) disables the second motor.
• If Pr.450 ≠ 9999, the following parameters will be enabled by turning ON the Second function selection (RT) signal.
342
14. (C) Motor Constant Parameters
14.1 Applied motor
page 345 for offline auto tuning.)
Motor
Constant-torque motor
Vector control dedicated motor
IPM motor
SPM motor
Standard motor
Constant-torque motor
Vector control dedicated motor
IPM motor
SPM motor
Standard motor
Constant-torque motor
Standard motor
Constant-torque motor
No second applied motor
page 345 for offline auto tuning.)
Motor constant value range when performing
offline auto tuning (increment)
Pr.82 (Pr.455), Pr.859 (Pr.860)
• 0 to 500 A, 9999 (0.01 A)
Pr.90 (Pr.458), Pr.91 (Pr.459)
• 0 to 50 Ω, 9999 (0.001 Ω)
Pr.92 (Pr.460), Pr.93 (Pr.461) (Induction motor)
• 0 to 6000 mH, 9999 (0.1 mH)
Pr.92 (Pr.460), Pr.93 (Pr.461) (PM motor)
• 0 to 650 mH, 9999 (0.01 mH)
Pr.94 (Pr.462)
• 0% to 100%, 9999 (0.1%)
Pr.706 (Pr.738)
• 0 to 5000 mV (rad/s), 9999 (0.1 mV/(rad/s))
Pr.82 (Pr.455), Pr.859 (Pr.860), Pr.90 (Pr.458),
Pr.91 (Pr.459), Pr.92 (Pr.460), Pr.93 (Pr.461),
Pr.94 (Pr.462), Pr.706 (Pr.738)
• Internal data value 0 to 65534, 9999 (1)
Pr.82 (Pr.455) and Pr.859 (Pr.860)
• 0 to 500 A, 9999 (0.01 A)
Wye
Pr.90 (Pr.458), Pr.91 (Pr.459),
connection
Pr.92 (Pr.460) and Pr.93 (Pr.461)
• 0 to 50 Ω, 9999 (0.001 Ω)
Pr.92 (Pr.460), Pr.93 (Pr.461)
Delta
• 0 to 50 Ω, 9999 (0.001 Ω)
connection
Pr.94 (Pr.462)
• 0 to 500 Ω, 9999 (0.01 Ω)
Electronic thermal O/L
relay function
Constant-
Standard
torque
○
○
○
○
○
○
○
○
○
○
○
○
○
○