Setpoint Profiler
How to load a program from disk
Step
1
Press the Display button to change to online
mode.
2
Press the Menu button to display the online
menu.
3
Press Down Arrow button to highlight Setpoint
Profiles.
4
Press Enter.
5
Press Down Arrow button to highlight Load
Program From Disk.
6
Press Enter.
7
Press Up Arrow or Down Arrow to highlight
desired program file.
8
Press Enter to select. Press Enter again to
load.
212
Table 5-12 Procedure To Load A Program From Disk
Action
VPR & VRX – User Manual
Result/Notes
An online display is shown.
Online menu is displayed.
Cursor moves down.
Setpoint Profiles menu is displayed.
Prompt is highlighted.
Load Program sub-menu is displayed.
Program is highlighted.
Program is loaded from the disk to the instrument.
12/00