Table of Contents
Advertisement
Programming and Operating Concepts
Getting familiar with the operating modes
To develop a feel for navigating between modes, power up the instrument and perform steps 1-7 below.
1.
When powering up the instrument for the very first time, the logo display will initially appear. Press
the Menu button several times until the ON LINE, PROGRAM, or MAINTENANCE mode MAIN
MENU is displayed. Refer to Figure 3-5. Note: Menus are shown with all possible options; your menu
may not have all options.
2.
Once you have established which MAIN MENU you are on, use the Up Arrow and Down Arrow
buttons to verify each MAIN MENU choice as indicated in Figure 3-5.
3.
Use the Up Arrow and Down Arrow buttons to find and highlight the menu's SET MODE prompt.
4.
When the SET MODE prompt is highlighted, press the Enter button.
5.
Use the Up Arrow or Down Arrow buttons to switch the instrument to one of the other two instrument
modes and press the Enter button.
6.
Once within the mode selected in Step 5, scroll through the mode's MAIN MENU using the Up Arrow
and Down Arrow buttons. Verify each menu choice as indicated in Figure 3-5.
7.
Repeat Steps 3 through 6 for the last of the three mode selections possible.
Having completed the preceding exercise, changing the instrument's mode should now be a simple task.
Furthermore, a fundamental understanding of how the Menu, Up Arrow, Down Arrow, and Enter buttons
work should now be at your fingertips.
34
VPR & VRX – User Manual
12/00
Advertisement
Table of Contents
