Table of Contents
Advertisement
4.3 The Program mode menu
Program mode is an off-line mode for programming (configuring) the instrument. In this mode, all outputs
are frozen.
Table 4-1 shows the top level of the Program Mode menu with all available options. Your instrument may
have a reduced menu if options are not present or if features have been disabled.
Prompt
SET MODE
LABELS
ANALOG INPUTS
CONTROL LOOPS
ANALOG OUTPUTS
DISCRETE INPUTS
DISCRETE OUTPUTS
CALCULATED VALUES
ALARMS
TOTALIZERS
PROFILERS
CONSTANTS
DISPLAYS
FEATURES
SECURITY
SERIAL COMM
COPY BLOCK
CLOCK
LOAD/STORE CONFIG
SCAN RATE
LANGUAGE
12/00
Programming Function Blocks and Features
Table 4-1 Program Mode Menu
Change operating mode of programmer
Enter descriptive labels for parameters using instrument's buttons
or a QWERTY keyboard or barcode reader.
Program Analog Inputs.
Program Control Loops.
Program Analog Outputs.
Program Discrete Inputs.
Program Discrete Outputs.
Program Calculated Values.
Program Alarms.
Program Totalizers.
Program Setpoint Profiles.
Program Constants.
Assign primary Online displays to the Display button.
Enable/disable certain menu items.
Enable/disable security on certain items.
Program Serial Communication.
Copy any function block to another channel.
Set time and date.
Store and load configurations/calibrations.
Set scan rate of instrument.
Select language of instrument.
VPR & VRX – User Manual
Function
79
Advertisement
Table of Contents
