Appendix B
In DC circuits, the power dissipation under steady state condition can be eliminated by placing a diode (in
series with a resistor) in parallel with the load (see Figure Appendix B-4). The value of R should be less
than or equal to the DC resistance of the inductive load.
Figure Appendix B-4 is an illustration of DC load noise suppression.
302
+
D.C.
supply
R
–
Diode
Figure Appendix B-4 DC Load Noise Suppression
VPR & VRX – User Manual
Inductive
load
20782
12/00