Table of Contents
Advertisement
8.1 Overview
This section includes information on maintenance through the Maintenance Mode menu using some off-line
utility programs and diagnostics procedures.
To avoid voiding the warranty, contact your service provider before attempting any service or repair of this
instrument.
Maintenance Mode is an off-line mode for maintaining proper operation of the instrument and setting
defaults.
Enter Maintenance Mode by selecting "MAINTENANCE" on the "SET MODE" line of any main menu.
Remember that this mode is an off-line mode.
Menu as displayed
SET MODE
CALIBRATE ANALOG INPUTS
CALIBRATE ANALOG OUTPUTS
OFF-LINE DIAGNOSTICS
DATABASE SERVICES
RESET UNIT
PRODUCT INFORMATION
MAINS FREQUENCY
WARM START TIME
DEMO
12/00
8. Maintenance
Table 8-1 Maintenance Mode Menu
Changes operating mode of instrument
Calibrates Analog Inputs
Calibrates Analog Outputs
Runs diagnostic tests to check various instrument functions
Clears the configuration and/or calibration from the instrument
memory. Upgrades software features.
Resets instrument to recognize changes to Main Frequency or Scan
Frequency
Displays product information
Sets the power supply frequency (50 or 60 Hz)
Sets warm start time.
Enables simulated input values. For demonstration purposes only.
VPR & VRX – User Manual
Maintenance
Function
255
Advertisement
Table of Contents
