Table 6-3 Stop Panel Display Rotation Procedure; Table 6-4 Resume Panel Display Rotation Procedure; Figure 6-5 Panel Display - Honeywell VPR100 User Manual

Interacting with Panel Display (VPR 100/VRX100)
To stop the rotation of the panel display on a single point, follow the procedure in Table 6-3.
Step Action
1 Press Tab key
2 Press Tab key
3 Press Enter
To resumes rotation through all points, follow the procedure in Table 6-4.
Step Action
1 Press Tab key
2 Press Enter
12/00
PRESSURE 3
PRESS 3
30.00
PSI

Figure 6-5 Panel Display

Table 6-3 Stop Panel Display Rotation Procedure

Displays menu item SET HOLD at the lower right hand corner of the
display.
Displays the desired point.
Holds display on desired point. An "H" appears in the lower right of the
display.

Table 6-4 Resume Panel Display Rotation Procedure

Displays menu item REL HOLD at the lower right hand corner of the
display.
The "H" disappears and rotation resumes.
VPR & VRX – User Manual
Online Operations Using Primary Displays
11/15
12:15
H
Result
Result
225