Figure 5-9 Example Of A Segment Loop - Honeywell VPR100 User Manual

Segment Loops
You can program up to four segment loops within a profile. A segment loop is one or more consecutive
segments which must repeat a selected number of times before proceeding to the next segment outside of
the loop.
Segment loops are specified by the parameters REPEAT COUNT, FROM SEGMENT #, and TO
SEGMENT #. Loops are reset when Auto Cycle is reset and when the profile is reset. Loops can contain
other loops but cannot overlap.
Examples of valid loops
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 10
Loop #2: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 9
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 10
Loop #2: LOOP FROM SEGMENT = 2
LOOP TO SEGMENT = 10
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 10
Loop #2: LOOP FROM SEGMENT = 2
LOOP TO SEGMENT = 9
Example of invalid (overlapping) loops
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 9
Loop #2: LOOP FROM SEGMENT = 2
LOOP TO SEGMENT = 10
12/00
Segment #3
Segment #1
Loop#1 Repeated segments
From Segment # 2
To Segment #3
Repeat Count = 1

Figure 5-9 Example Of A Segment Loop

VPR & VRX – User Manual
Segment #5
Segment #3
Setpoint Profiler
193